The KOM series of pre-mounted optics are assembled and aligned to produce a true “mount and shoot” optic that is ready to use the second you receive it. All KOM optics offer the lowest possible mount height for AK, SVD and SKS/Mosin-Nagant rifles for that perfect cheek weld while providing true center bore alignment as well. Each is also available in several heights; 30mm, 40mm, 47mm, 59mm, 65mm and 65V (Vepr). AK rifles and variants require a minimum of 59mm and SVD rifles require a minimum of 47mm. SKS and Mosin-Nagant rifles equipped with a side rail can use all heights of KOM optics. To determine what height it right for you, simply measure from the center of your side rail to the top of the receiver cover. This will be the clearance amount your rifle requires. It is recommended to select a higher mount than the minimum if you wish to use your iron sights as well. Larger magnifications (48mm and up) may require you to go up two additional heights.
Mount Height – 59mmUniversal bottom mount will accept most standard side rails and comes with both front and rear stop pins installed. Simply remove the stop pin that is not required for rifle's side rail type.
|Objective Aperture||42 mm|
|Illuminated||9 Setting Variable|
|Reticle||Modern 1000 m|
|Field of View||2 grad 24 min|
|Field of View at 1000 m||39 m|
|Eye Relief||75 mm|
|Eye Relief Diameter||4.2 mm|
|Mount Type||Universal AK & SVD|
|Temperature||+45 to -40oC|
|Power Source||3V (CR2032)|
|Item Weight||2 pounds|